How to choose a cut file for your machine

A file that looks great in a preview picture can still be a poor fit for the machine in your shop. This guide covers what to check before you download or buy.

Start with your machine

MachineWhat suits it
Laser (CO2, diode, fiber)Very fine detail, thin lines, small holes, engraving fills. Wood, acrylic, leather and card respond well. Check your bed size, since many files are designed for a particular sheet size.
PlasmaBold shapes with generous gaps. The cut is wider and the heat affects the edge, so hair-thin details and tiny holes tend to fail. Signs, silhouettes and lettering with chunky strokes work best.
WaterjetAlmost any flat shape, in metal, stone, glass or tile. No heat, so fine detail is possible, but the cut is still wider than a laser's and very thin bridges can break.

Look for the signs of a true cut file

Warning signs

Assembled models need an extra check

Puzzles, boxes and slot-together models are drawn for one material thickness. If you use a different sheet, the slots will be loose or too tight. Look for the thickness in the listing, or choose a file with adjustable settings.

Test cheap first

Cut a small piece from scrap before committing a full sheet of good material. It shows you scale, speed settings and whether the file has duplicate lines or open paths.

2Cut's "Ready to cut" switch, and the order of results, are guesses made from each listing's text. Always read the listing on the source site before you buy.